License: Creative Commons Attribution 4.0 International license (CC BY 4.0)
When quoting this document, please refer to the following
DOI: 10.4230/OASIcs.iPMVM.2020.8
URN: urn:nbn:de:0030-drops-137574
URL: http://dagstuhl.sunsite.rwth-aachen.de/volltexte/2021/13757/
Go to the corresponding OASIcs Volume Portal


Sofi, Ardalan R. ; Ravani, Bahram

Determination of Aggregate Elastic Properties of Powder-Beds in Additive Manufacturing Using Convolutional Neural Networks

pdf-format:
OASIcs-iPMVM-2020-8.pdf (5 MB)


Abstract

The most popular strategy for the estimation of effective elastic properties of powder-beds in Additively Manufactured structures (AM structures) is through either the Finite Element Method (FEM) or the Discrete Element Method (DEM). Both of these techniques, however, are computationally expensive for practical applications. This paper presents a novel Convolutional Neural Network (CNN) regression approach to estimate the effective elastic properties of powder-beds in AM structures. In this approach, the time-consuming DEM is used for CNN training purposes and not at run time. The DEM is used to model the interactions of powder particles and to evaluate the macro-level continuum-mechanical state variables (volume average of stress and strain). For the Neural Network training purposes, the DEM code creates a dataset, including hundreds of AM structures with their corresponding mechanical properties. The approach utilizes methods from deep learning to train a CNN capable of reducing the computational time needed to predict the effective elastic properties of the aggregate. The saving in computational time could reach 99.9995% compared to DEM, and on average, the difference in predicted effective elastic properties between the DEM code and trained CNN is less than 4%. The resulting sub-second level computational time can be considered as a step towards the development of a near real-time process control system capable of predicting the effective elastic properties of the aggregate at any given stage of the manufacturing process.

BibTeX - Entry

@InProceedings{sofi_et_al:OASIcs.iPMVM.2020.8,
  author =	{Sofi, Ardalan R. and Ravani, Bahram},
  title =	{{Determination of Aggregate Elastic Properties of Powder-Beds in Additive Manufacturing Using Convolutional Neural Networks}},
  booktitle =	{2nd International Conference of the DFG International Research Training Group 2057 – Physical Modeling for Virtual Manufacturing (iPMVM 2020)},
  pages =	{8:1--8:17},
  series =	{Open Access Series in Informatics (OASIcs)},
  ISBN =	{978-3-95977-183-2},
  ISSN =	{2190-6807},
  year =	{2021},
  volume =	{89},
  editor =	{Garth, Christoph and Aurich, Jan C. and Linke, Barbara and M\"{u}ller, Ralf and Ravani, Bahram and Weber, Gunther H. and Kirsch, Benjamin},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/opus/volltexte/2021/13757},
  URN =		{urn:nbn:de:0030-drops-137574},
  doi =		{10.4230/OASIcs.iPMVM.2020.8},
  annote =	{Keywords: Additive Manufacturing, Convolutional Neural Network, Homogenization, Discrete Element Method, Powder-Bed}
}

Keywords: Additive Manufacturing, Convolutional Neural Network, Homogenization, Discrete Element Method, Powder-Bed
Collection: 2nd International Conference of the DFG International Research Training Group 2057 – Physical Modeling for Virtual Manufacturing (iPMVM 2020)
Issue Date: 2021
Date of publication: 27.04.2021


DROPS-Home | Fulltext Search | Imprint | Privacy Published by LZI